How To Set Washing Machine To Spin Only

Quick Guide

Thank You lot FOR PURCHASING A HOTPOINT PRODUCT.
To receive more comprehensive assistance, register the appliance on www.hotpoint.eu/register

Earlier using the appliance carefully read the Health and Safety guide.
Before using the automobile, information technology is imperative that the transport bolts are removed. For more detailed instructions on how to remove them, run across the Installation Guide.

Control PANEL

ON/OFF push
DRYING button
DRYING ONLY button
MULTI RINSE button
Selection button
DIRECT INJECTION button
Start/Break button and indicator light
Fundamental LOCK push
DELAY TIMER button
SPIN button
TEMPERATURE push button
Automobile Make clean button
WASH Wheel SELECTOR KNOB

WASH Bicycle Table

The cycle duration indicated on the display or teaching manual is an gauge based on standard atmospheric condition. The actual duration may vary in relation to several factors, such as the temperature and force per unit area of the incoming h2o, ambient temperature, corporeality of detergent, load quantity and type, load balancing and any additional options selected. The values given for programmes other than the Eco xl-60 programme are indicative simply.
one) Eco 40-60 (Wash) – Exam wash wheel in compliance with EU Ecodesign regulation 2022/2014. The almost efficient plan in terms of free energy and water consumption for washing unremarkably soiled cotton fiber laundry.
Note: spin speed values shown on the brandish can slightly differ from the values stated in the tabular array.
iv) Eco 40-60 (Launder & Drying)- Test wash and drying bike in compliance with EU Ecodesign regulation 2022/2014. To access "wash and dry" bicycle select "Eco 40-60" launder program and set the "Drying" choice level to "Closet". The almost efficient programme in terms of energy and water consumption for washing and drying is usually soiled cotton laundry. At the end of a cycle, the garments can be immediately stored in the cupboard.

Product DESCRIPTION

Acme
Detergent dispenser drawer
Control panel
Handle
Porthole door
Drain pump (behind the plinth)
Plinth (removable)
Adjustable feet (2)

For all testing institutes:
ii) Long cotton bike: set programme 3 at temperature 40°C.
3) Long synthetics cycle: set wheel 4 at a temperature of twoscore°C.
* By selecting the bicycle and excluding the spin bicycle, the washer-dryer will drain only.
** The duration of the launder cycles can be checked on the brandish.
*** After programme stop and spinning with maximum selectable spin speed, in a default program setting.
**** If a drying bike is also programmed, the machine will run a "wash+dry out" programme lasting 45' and a 1kg laundry load.

DETERGENT DISPENSER DRAWER

Compartment *:
Do not insert detergent in this compartment.
Compartment one: Washing detergent (pulverization or liquid)
If liquid detergent is used, the removable plastic sectionalisation A (supplied) should be used for proper dosage.
If pulverization detergent is used, identify the division into slot B.
Compartment 2: Additives (fabric softeners, etc.)
The cloth softener must not exceed the "MAX" level.
! Apply pulverization detergent for white cotton garments, for pre-washing, and for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.

Launder CYCLES

Follow the instructions on the symbols of the garment's wash intendance characterization. The value indicated in the symbol is the maximum recommended temperature for washing the garment.

Anti-Stain Turbo
This cycle is ideal for washing daily stains in 45'. It is platonic for mixed fabrics and coloured garments.
Anti-Stain 20°C
this programme ensures maximum stain removal capacity with no need for pre-treatment at low temperatures, preserving fabrics and colours.
Cotton
Suitable for washing towels, underwear, table cloths, etc. made of resistant linen and cotton that are moderate to heavily soiled.
Synthetics
Specific for constructed items. If the dirt is difficult to remove, the temperature tin be increased up to sixty° and powder detergent can be used too.
Rapid thirty′
For washing lightly soiled garments in a short fourth dimension. Not suitable for wool, silk and garments to be done by hand.
Mix Wash & Dry out
use program vi to launder and dry out mixed garments (cotton and synthetics). This cycle may exist used to launder and dry loads of up to 3.five kg; we recommend the use of liquid detergent.
The use of steam in this programme is optimised to reduce the formation of creases on garments, making them easier to iron.
Shirts Wash & Dry
Use plan 7 to wash and dry shirts and T-shirts in dissimilar fabrics and colours to ensure maximum intendance. This cycle may be used to launder and dry loads of up to 2 kg. To reach optimum results, employ liquid detergent and pre-treat cuffs, collars and stains. The use of steam in this
programme is optimised to reduce the formation of creases on garments, making them easier to iron.
Wool – Woolmark Apparel Care – Green:
the wool wash bike of this machine has been approved by The Woolmark Company for the washing of wool garments labelled equally "hand launder" provided that the products are washed according to the instructions on the garment label and those issued past the manufacturer of this washer-dryer. (M1318)
Eco 40-sixty
For washing commonly soiled cotton fiber garments are declared to be washable at 40 °Cor lx °C, together in the same cycle. This is the standard cotton programme and the most efficient in terms of h2o and energy consumption.
xx°C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
White
For heavily soiled whites and resistant colours.
Anti Allergy
Suitable for removing major allergens such every bit pollen, mites and cat or dog pilus.
Steam Refresh
For refreshing garments, neutralise unpleasant odours and relax the fibres by delivering steam into the pulsate. The garments will be damp at the cease of the cycle.
Ultradelicates
For washing very delicate garments. It is advisable to turn the garments inside out before washing them. For best results, use liquid detergent on delicate garments.
We recommend turning the garments inside out before washing and placing small items into the special bag for washing delicates. Use liquid detergent on fragile garments for best results.
When selecting an exclusively fourth dimension-based drying office, a drying cycle is performed at the end of the launder cycle that is peculiarly delicate, cheers to low-cal treatment and appropriate temperature control of the water jet.
The recommended durations are:
i kg of synthetic garments –> 165 min
1 kg of synthetic and cotton garments –> 180 min
1 kg of cotton garments –> 180 min
The degree of dryness depends on the load and material composition.
Rinse&Spin
Designed for rinsing and spinning.
Spin&Drain
Designed for spinning and draining the water.

DISPLAY
The display is useful when programming the motorcar and provides a great deal of information.

The post-obit volition appear in expanse A: the icon and plan selected, the washing and drying phases and fourth dimension remaining to the terminate of the wheel.
Expanse B will include the two intensity levels relative to the Directly INJECTION pick. The indicator lights relative to the available functions appear in area C. Expanse D will display the fourth dimension remaining to the offset of the selected bicycle if the DELAY TIMER function was set.
Area E will display the maximum bachelor spin speed on the basis of the set up bicycle; if the cycle does not include the spin bicycle setting, the dimly lit "–" symbol will appear in the surface area.
Surface area F will show the temperature value that tin be selected on the basis of the gear up wheel.
If the bicycle does not include the setting of the temperature, the dimly lit "–" symbol will announced in the area.
! The first fourth dimension the machine is switched on, you lot will exist asked to select the language and the display will automatically show the language choice carte du jour.
To select the desired language press the X and Y buttons; to ostend the option printing the Z push.
To change the language switch off the automobile and printing buttons G, H, I simultaneously until an alarm is heard: the linguistic communication-option menu volition be displayed again.
! To modify the display luminosity, which past default is set up to the highest value, switch the motorcar off then simultaneously press buttons G, L and M until the cablegram sounds.
Printing buttons X and Y to choose the desired level of luminosity then confirm past pressing push button Z.
! During the launder cycle or when the DELAY TIMER role has been enabled, if the user does not collaborate with the display for 1 infinitesimal the SCREEN SAVER activates. To return to the previous window, simply printing any button.

LOCKED DOOR INDICATOR
When lit, the symbol indicates that the door is locked. To prevent any damage, await until the symbol turns off before opening the door. To open up the door while a cycle is in progress, press the START/Pause button ; if the symbol is off, the door can be opened.

Beginning-Time USE
One time the apparatus has been installed, and before it is used for the showtime fourth dimension, run a wash bike with detergent and no laundry, by setting the "Auto Clean" cycle.

DAILY USE
Set the laundry by following the suggestions appearing under the "TIPS AND SUGGESTIONS" department.
– Press the ON/OFF button ; "HOTPOINT" volition appear on the display; the indicator light relative to the Offset/PAUSE button volition flash slowly greenish.
– Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in the launder cycle table.
– Pull out the detergent dispenser drawer and cascade the detergent into the relevant compartments, as described in the "DETERGENT DISPENSER DRAWER" section.
– Close the door.
– Apply the WASH Cycle selector knob to select the desired wash bike: the cycle'southward name will appear on the display; the cycle will exist associated with a specific temperature and spin speed which can be modified. The duration of the cycle will appear on the display.
– Modify the temperature and/or spin speed: the machine automatically selects the maximum temperature and spin speed set for the selected launder bicycle; these values cannot, therefore, exist increased. Pressing the button gradually reduces the temperature downwards to the cold wash setting (the "–" symbol will appear on the brandish). Pressing the button gradually reduces the spin speed until it is completely excluded (the "–" symbol will announced on the display). Pressing the buttons farther restores the maximum allowed values for the selected cycle.
– Select the desired options.
– Press the Beginning/Pause button to start the wash cycle; the relative indicator light volition light upwards steady light-green and the door will lock ( symbol on).

PAUSING A Wheel
To pause the launder bicycle, printing the START/Suspension button again; the indicator light will flash amber. To kickoff the wash cycle from the point at which information technology was interrupted, press the Beginning/PAUSE push again.
CHANGING A RUNNING Wash Bicycle
To change a launder cycle while information technology is in progress, pause the washing motorcar using the Showtime/Intermission button (the relative indicator low-cal will flash bister), then select the desired bike and press the START/PAUSE button again.
! To cancel a bicycle that has already begun, press and concur the ON/OFF button. The cycle volition be stopped and the machine volition switch off.
AT THE END OF THE WASH CYCLE
This will be indicated by the word "CYCLE END" on the display; when the symbol switches off, the door may be opened. Open up the door and switch off the machine. If you practise not press the ON/OFF button, the washing auto will switch off automatically after about 10 minutes. Close the water tap and unload the washing car. Leave the door ajar to allow the drum to dry.

OPTIONS

– If the selected role is incompatible with the set up wash cycle, the relevant indicator calorie-free will announced dimly lit; the incompatibility volition besides be signalled by a buzzer (3 beeps) and the wording "No Pick" will appear on the display.
– If the selected office is incompatible with some other previously ready function, the wording "No Selection" will announced on the display and the function will non exist enabled.
Steam Hygiene
This pick enhances washing performance by generating steam during the launder cycle to remove any leaner from the fibres, which are treated at the same time. Place the laundry in the drum, choose a compatible programme and select an selection .
! The steam generated during the operation of the washer-dryer may cause the porthole door to go hazy.
Delay Timer
To set a delayed start for the selected cycle, press the corresponding button repeatedly until the desired delay menstruation is reached. To remove the delayed start setting, press the button until "– h" appears on the display.
Temperature
Each wash cycle has a pre-defined temperature. To modify the temperature, press the button. The value will appear on the brandish.
Spin
Each launder cycle has a pre-defined spin speed. To modify the spin speed, press the button. The value volition appear on the display.
Direct Injection
The washer-dryer is equipped with the innovative technology «Direct Injection» which pre-mixes h2o and detergent, thus immediately activating the detergent's cleaning principles. This active emulsion is directly introduced into the drum of the washer-dryer and penetrates the fibres with more efficacy in cleaning even heavily soiled garments at low temperatures, fully preserving colours and fabrics.
The mode «Power» ensures the best cleaning functioning and the mode «Energy Saver» allows more energy saving.
Drying
The desired drying cycle type may be set up by pressing the DRYING button once or several times. Two options are available:
A – Based on how damp the apparel are in one case they have been dried:
Fe: suitable for apparel which will need ironing later. the remaining dampness softens creases, making them easier to remove.
Hanger: ideal for wearing apparel that do not need to be stale fully.
Cupboard: suitable for laundry which can be put back in a cupboard without being ironed.
Extra: suitable for garments that need to be dried completely, such as sponges and bathrobes.
B – Based on a set time menstruum: between 30 and 180 minutes.
To exclude the drying phase press the relevant button until the text OFF appears on the display.
If your laundry load to be done and dried is much greater than the maximum stated load, perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them dorsum in the drum. At this point, follow the instructions provided for a "Drying only" cycle. Repeat this procedure for the residual of the load. A cooling-down menstruum is always added to the end of each drying cycle.
Drying but
Press the push to perform the drying-just cycle.
Afterward selecting the desired cycle (uniform with the type of garments), press the push button to exclude the washing phase and start the drying phase at the maximum level for the selected cycle. The drying level or time may be set and inverse by pressing the drying button .
Multi Rinse
This choice allows for selecting the desired rinse type to protect sensitive skin. Press the button once to set level "Extra +1", which allows for selecting an boosted rinse to the standard cycle rinses and removing all traces of detergent. Press the button again to ready level "Extra +two", which allows for
selecting two additional rinses to the standard bike rinses; this cycle is recommended for very sensitive peel. When the push button is pressed for the third time, the "Actress +three" level is gear up, which allows for selecting 3 additional rinses to the standard bicycle rinses. When started with cycles at a temperature of forty°C, this selection makes it possible to remove major allergens such every bit pollen and cat or dog hair. With cycles running at temperatures college than 40°C, an excellent level of anti-allergy protection is accomplished. Press the push button again to return to the "Normal Rinse" mode. If the current mode cannot be set nor inverse, the display will show "No Choice" or "No Modify".
KEY LOCK
To activate the command panel lock, printing and hold the push button for roughly 2 seconds. When the brandish visualises "KEY LOCK ON", the control panel is locked (except for the ON/OFF button ). This will prevent accidental modifications to wash cycles, peculiarly when children are at home. To deactivate the control panel lock, press and concur the push for approximately ii seconds.

TIPS AND SUGGESTIONS

Carve up the laundry according to:
Type of fabric (cotton, mixed fibres, synthetics, wool, garments to be hand-done). Colour (divide coloured garments from whites, wash new coloured garments separately). Delicates (pocket-sized garments – such as nylon stockings – and items with hooks – such equally bras: insert them in a material bag).
Empty the pockets:
Objects such every bit coins or lighters can impairment the washer-dryer and the drum. Check all buttons.
Follow the dosage recommendation/additives
It optimizes the cleaning effect, information technology avoids irritating residues of surplus detergent in your laundry and information technology saves coin past fugitive waste product of surplus detergent.
Use low temperature and longer duration
The nigh efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer elapsing.
Observe the load sizes
Load your washing machine up to the capacity indicated in the "Wash Bicycle Table" tabular array to salvage h2o and free energy.
Noise and remaining moisture content
They are influenced past the spinning speed: the higher the spinning speed in the spinning phase, the higher the racket and the lower the remaining moisture content.

CARE AND MAINTENANCE

Before performing cleaning and maintenance, switch the washer-dryer off and disconnect it from the mains power. Exercise non use flammable liquids to make clean the washer-dryer. Clean and maintain your washer-dryer periodically (at least 4 times per year).
Cutting off the water and electricity supplies
Plow off the water tap after every launder bicycle. This volition limit wear on the hydraulic organisation inside the washer-dryer and help to forbid leaks. Unplug the washer-dryer when cleaning information technology and during all maintenance work.
Cleaning the washer-dryer
The outer parts and prophylactic components of the appliance can be cleaned using a soft material soaked in lukewarm soapy water. Do non utilize solvents or abrasives. The washer-dryer has an "Motorcar Make clean" cycle for its internal parts; it must be run without whatsoever load in the pulsate.
To help the wash cycle you lot may want to use either the detergent (i.e. a quantity 10% the quantity specified for lightly-soiled garments) or special additives to clean the washer-dryer. Nosotros recommend running a cleaning programme every 40 wash cycles.
To actuate the cycle, press the button for 5 seconds then printing START/Pause to start the cycle, which will last roughly lxx minutes.
Cleaning the detergent dispenser drawer
Remove the dispenser drawer past lifting and pulling information technology outwards. Wash it under running water; this procedure should be effected regularly.
Caring for the door and pulsate
Always leave the porthole door ajar in order to prevent unpleasant odours from forming.
Cleaning the pump
The washer-dryer is fitted with an Auto Clean pump which does not require any maintenance. Small items (such equally coins or buttons) may sometimes fall into the protective pre-chamber situated at the base of the pump. ! Make sure that the wash cycle has ended and unplug the appliance.
To access the pre-chamber:

remove the covering panel on the front end side of the auto past inserting a screwdriver in the centre and sides of the panel and using it equally a lever;
loosen the drainage pump cover by turning it anti-clockwise: it is normal for some h2o to leak out;
clean the inside thoroughly;
spiral the cover back on;
put the console back in identify, making sure the hooks slot in place before pushing the panel onto the appliance.

Checking the h2o inlet hose
Check the inlet hose at to the lowest degree once a year. If it is cracked or broken, it must exist replaced: during launder cycles, the loftier pressure of the h2o could all of a sudden split the hose open.
! Never use hoses that have already been used.

LOAD BALANCING SYSTEM
Before every spin cycle, to avoid excessive vibrations before every spin and to distribute the load in a compatible manner, the pulsate rotates continuously at a speed that is slightly greater than the washing rotation speed. If, afterwards several attempts, the load is not balanced correctly, the machine spins at a reduced spin speed. If the load is excessively unbalanced, the washing car performs the distribution process instead of spinning. To encourage improved load distribution and residuum, we recommend small and large garments be mixed in the load.

ACCESSORIES
Contact our Technical Assistance Service to check whether the following accessories are available for this washer-dryer model.
Stacking kit
With this accessory, y'all tin can secure the tumble dryer to the upper role of your washer-dryer to save space and facilitate the loading and unloading of the tumble dryer.

TRANSPORT AND Treatment
Practise not lift the washer-dryer by gripping information technology from the upper section. Unplug the appliance and close the water tap. Bank check that the door and detergent dispenser drawer are tightly airtight. Disassemble the filling hose from the water tap so disassemble the drain hose. Empty all the h2o remaining in the hoses and secure the latter so that they do non become damaged during transport. Utilize the transport bolts back on. Echo, in reverse order, the transport bolt removal process described in the "Installation instructions".

DEMO Style: to conciliate this office, switch the washing car OFF. Then printing and hold the "Start/Suspension" button, within five seconds press also "ON/OFF" button and hold both buttons for 2 seconds.

TROUBLESHOOTING

Your washing machine could occasionally neglect to work. Before contacting the Technical Assistance Service, make sure that the problem cannot exist hands solved using the following list.

Anomalies	Possible causes / Solution
The washer-dryer does not start.	The apparatus is not plugged into the socket fully, or non enough to brand contact.
The washer-dryer does not start.	In that location is no power in the business firm.
The wash cycle does not start.	The washing machine door is not closed properly.
	The ON/OFF push button has not been pressed.
	The Starting time/Break button has non been pressed.
	The water tap has not been opened.
	A filibuster has been set for the start fourth dimension.
The washer-dryer does non fill with water ("NO WATER, turn thetap on" appears on the display).	The water inlet hose is not connected to the tap.
	The hose is bent.
	The h2o tap has not been opened.
	There is no h2o supply in the house.
	The pressure is besides low.
	The Commencement/Interruption button has not been pressed.
The washer-dryer continuously loads and unloads water.	The drain hose is not fitted betwixt 65 and 100 cm from the flooring.
	The free end of the hose is immersed in water.
	The wall drainage system is non fitted with a breather pipe. If the trouble persists even after these checks, turn off the water tap, switch the appliance off and contact the Technical Assistance Service. If the home is on one of the upper floors of a building, there may be problems relating to the back-siphonage, causing the washing machine to fill up with water and bleed continuously. Special anti-siphon valves are bachelor in shops and assistance to forestall this inconvenience.
The washer-dryer does not drain or spin.	The bike does not include drainage: with certain cycles, it must exist started manually.
	The drain hose is aptitude.
	The drainage duct is clogged.
The washer-dryer vibrates a lot during the spin wheel.	The drum was not unlocked correctly during installation.
	The washing auto is non level.
	The washing machine is tucked betwixt article of furniture cabinets and the wall.
The washer-dryer leaks.	The water inlet hose is not screwed on properly.
	The detergent dispenser drawer is obstructed.
	The drain hose is non properly attached.
The machine is locked and the brandish flashes, indicating an mistake code (e.one thousand. F-01, F-…).	Switch off the car and unplug it, look for approximately 1 minute and and then switch it back on again. If the problem persists, contact the Technical Aid Service.
There is besides much foam.	The detergent is not suitable for automobile washing (it should display the text "for washing machines" or "hand and automobile launder", or the similar).
There is besides much foam.	Too much detergent was used.
The washer-dryer does not dry.	The appliance is not plugged into the socket, or not plenty to make contact.
	There has been a ability failure.
	The appliance door is not shut properly.
	A Filibuster Timer has been set.
	DRYING is in the OFF position.

You tin can download the Safety Instructions, Product Fiche and Energy data by:

http://docs.hotpoint.european union

Visiting our website – http://docs.hotpoint.eu
Using QR Lawmaking
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your production's identification plate.
For User'due south Repair & Maintenance Information visit world wide web.hotpoint.european union
The model data tin exist retrieved using the QR-Lawmaking reported in the energy label. The characterization likewise includes the model identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu

Ezoic